Bag Notes

SHAFT

Project X 7.0

Project X

$48.99

Checked Sep 13, 2026 · verify at the retailer

We may earn a commission from purchases made through the links above.

Players who use this

  • "I've been using the Project X 5.0 shafts, and people tell me, "You should be using 6.0 [which is stiffer],' and I'm like, nope.
    View source
  • Shaft-wise, the MG4s had Project X 6.5s, which just so happen to be the same shafts spotted in the MG5s at the Amgen Irish Open, where McIlroy is the tournament favorite.
    View source
  • Featuring minimal looks, with only a small Callaway logo on the back of the club, the 4-iron to pitching wedge set-up has remained, as have the Project X 6.5 shafts.
    View source
  • in his 54° & 60° wedges, Rory uses ProjectX 6.5 which are one flex softer and 5 grams lighter per shaft than the ProjectX 7.0 he uses in his irons
    View source
  • The irons feature a stout Project X 6.5, while the wedges are built with True Temper’s Dynamic Gold Tour Issue S400.
    View source
  • For example, McIlroy plays Project X 7.0 in his TaylorMade irons but prefers the softer Project X 6.5 in his wedges.
    View source
  • Yes, this is Tiger with OG Project X. It's in a TaylorMade P790 long iron he's testing. Not moving away from X100.
    View source
  • Thompson actually plays Project X 5.0 in her irons and True Temper Dynamic Gold Tour Issue S200 in the wedges.
    View source
  • Although he changed irons, his shaft set-up has not changed, with the Project X 7.0 remaining in the bag.
    View source
  • Shaft-wise, he uses Project X 7.0, which have been a mainstay in his set-up for a long period of time.
    View source
  • When he gets into his Milled Grind wedges, though, he goes with a slightly softer Project X 6.5 shaft.
    View source
  • The four-time Major winner changed his iron shafts last month from Project X 7.0s to Dynamic Gold X7s.
    View source
  • Shafts: Project X 6.5 (52/56), True Temper Dynamic Gołd Tour Issue S400 (60)
    View source
  • In his iron setup, McIlroy uses ultra-stiff Project X 7.0 shafts.
    View source
  • Jordan Spieth uses Titleist Vokey Design SM11 wedges (46°-10F @46.5) with a Project X 125 6.5 shaft (52°-08F @51.5°, 56°-10S @55.5° and 60°-04T @ 60.5°) and with Project X 120 6.0 shafts
    View source
  • Irons: TaylorMade P770 PROTO (3), P760 (4) RORS PROTO MB (5-9), Project X HZRDUS 105 TX (3), Project X 7.0 (4-9, Length: +.25″, Lie: 1˚ Flat) Loft Progression: 20/23/26/30/34/38/42
    View source
  • Specs Ping Blueprint S 5-PW Shafts: Project X 6.5 Lofts: 27/30.5/34/38/42/46 Lies: 59.75/60.25/60.75/61.75/62.75/63.25 Length: +.25″ (37.25″ 8+ iron) Swingweight: D3+ to D4
    View source
  • All of his current irons have Project X 6.5 shafts and Golf Pride Tour Velvet grips, with Fleetwood also previously using the TaylorMade P770 in four and five irons.
    View source
  • Wedges: Titleist SM8 (46 degrees; Project X 6.5 shaft, 52 and 56 degrees; Project X 6.0 shafts), Titleist Vokey proto (60 degrees; True Temper Project X 6.0 shaft)
    View source
  • Irons: TaylorMade P760 (4), RORS PROTO MB (5-9) Shaft: Project X 7.0 Lie: Standard Length: 37″ 7-iron EOG Loft Progression: 23/26/30/34/38/42 Swingweight: D4
    View source
  • Tom KimPRESS
    Ranked among the best irons on the market, the T100 has been a regular feature in his bag, with Project X 6.0 shafts present for all of his irons.
    View source
  • Irons: Cobra King Tour (4-iron; Project X 6.5 shaft), Cobra King CB (5-6; Project X 6.5 shafts), Cobra King MB (7-PW; Project X 6.5 shafts)
    View source
  • Tom KimPRESS
    Irons: Titleist T200 (2-3), Titleist T100 (4-9) with Fujikura Ventus Black HB 10 TX (2), Project X 5.5 (3), Project X 6.0 (4-9) shafts
    View source
  • TaylorMade RORS proto (5-9), with Project X 7.0 shafts WEDGES: TaylorMade MG4 (46, 50, 54, 60 degrees), with Project X 6.5 shafts
    View source
  • Irons: TaylorMade P760 (4), RORS PROTO MB (5-9), Project X 7.0 (Length: +.25″, Lie: 1˚ Flat) Loft Progression: 23/26/30/34/38/42
    View source
  • Irons: Ping Blueprint S 5-PW (Lie: .5 degree flat, loft: 1˚ weak 27˚ 5-iron), Project X 6.0 (Length: std 38″ 5-iron, D1)
    View source
  • IRONS: Ping i230 (4) with Project X Red 6.5 shaft, Ping Blueprint S (5), Blueprint T (6-PW), with Project X 6.0 shafts
    View source
  • Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB, 60-08LB) Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
    View source
  • Wedges: Ping S159 (52S@51, 56S@55.5, 60B) (Lie: 62.5˚), Project X 6.5 (Length: -1/4″, 52@35.25″, 56@35″, 60@34.75″)
    View source
  • Irons: Titleist T100S* (3-iron; Graphite Design Tour AD-DI 105X shaft), Titleist T100 (4-PW; Project X 6.5 shafts)
    View source
  • Wedges: TaylorMade Milled Grind (48°, 52°, 56°), TaylorMade Hi-Toe (60°) with Project X 6.5 shafts
    View source
  • Wedges: TaylorMade MG4 Raw (46/09SB, 50/09SB, 54/11SB, 60/08LB), Project X 6.5 (46-54), Project X 6.5 Wedge (60)
    View source
  • Wedges: Ping Glide 3.0, 46°, Ping Glide Forged Pro, 52°, 56°, 60° with Project X 6.5 shafts
    View source
  • Irons: TaylorMade P7TW (5-PW) – Shafts: Project X 6.5 – sometimes introduces the TaylorMade GAPR Lo 4 iron
    View source
  • Tom KimPRESS
    IRONS: Titleist T200 (2), with Fujikura Ventus Black HB 10 X shaft, T100 (4-9), with Project X 6.0 shafts
    View source
  • TaylorMade Rors Proto (5-9; Project X 7.0 shafts), TaylorMade MG3 (46-09SB degrees; Project X 6.5 shaft)
    View source
  • Wedges: Callaway Jaws Raw (52-10, 56-12), Callaway Opus Prototype (60-04C) – Shafts: Project X 125 6.5
    View source
  • Titleist Vokey SM9 (54 S-Grind bent to 55° and 58 proto K-grind, bent to 59°; Project X 6.5 shafts)
    View source
  • Tom KimPRESS
    Irons: Titleist T200 (2,3-iron; Fujikura Ventus 10 HB ) Titleist T100 (4-9-iron; ProjectX shaft)
    View source
  • Wedges: TaylorMade MG (48 degrees), TaylorMade MG2 TW (56 and 60 degrees; Project X 6.5 shafts)
    View source
  • Wedges: TaylorMade MG3 (46 degrees), TaylorMade MG2 (56 and 58 degrees; Project X 6.5 shafts)
    View source
  • Irons: TaylorMade Prototype (4-iron) , Rors Proto blade (5-9-iron; Project X 7.0 shafts)
    View source
  • Irons: Ping Blueprint S (4i, 5i, Project X 6.0), Ping Blueprint T (6i-PW, Project X 6.0)
    View source
  • Wedges : TaylorMade MG3 Raw (46-09SB, 54-13SB and 58-11SB degrees; Project X 6.5 shafts)
    View source
  • Irons: TaylorMade P-750 (4), TaylorMade Rors Proto P-730 (5-9) with Project X 7.0 shaft
    View source
  • Irons: TaylorMade Prototype (4-iron), Rors Proto blade (5-9-iron; Project X 7.0 shafts)
    View source
  • Wedges: TaylorMade Milled Grind wedges (52, 56 & 60 degrees) with Project X 6.5 shafts
    View source
  • Wedges: TaylorMade MG4 (46-09 SB, 50-09 SB, 54-11 SB, 60-08 LB, Project X 6.5 shafts)
    View source
  • IRONS: TaylorMade P·760 (4), TaylorMade RORS proto (5-9), with Project X 7.0 shafts
    View source
  • Irons – TaylorMade P760 (4), TaylorMade Rors Proto (5-9) Shaft: Project X 7.0 (4-9)
    View source
  • Wedges: Titleist Vokey SM6 Raw (46, 52, 56, 60 degrees) with Project X 6.0 shafts
    View source
  • TaylorMade MG3 Raw (46-09SB, 54-13SB and 58-11SB degrees; Project X 6.5 shafts)
    View source
  • Irons: Nike MM prototype (2), Nike VR Pro Blade (3-9) with Project X 7.0 shafts
    View source
  • Sahith Theegala uses Ping Blueprint S irons (4-PW) with Project X 6.5 shafts
    View source
  • Irons: TaylorMade P790 (3), TaylorMade P750 (4-PW) with Project X 6.5 shafts
    View source
  • Sam Burns uses Callaway Apex MB irons (4-PW) with Project X 125g 6.5 shafts
    View source
  • Irons: TaylorMade P760 4, TaylorMade Rors Proto 5-9 (Project X 7.0 shafts)
    View source
  • WEDGES: TaylorMade MG4 (46, 50, 54, 60 degrees), with Project X 6.5 shafts
    View source
  • Irons: Titleist 716 T-MB 4-iron, 716 AP2 (5-9) with Project X 6.5 shafts
    View source
  • Project X 6.5 (46°, 50°, 54°), Project X 6.5 Wedge (60°)
    View source
  • Jon Rahm uses Callaway Apex TCB Irons (4-PW) with Project X 6.5 Shafts
    View source
  • IRONS: Callaway Apex MB (4-PW), with Project X 6.5 shafts - SHOP NOW
    View source
  • Irons: TaylorMade Rors Proto P730 (3-9 iron; Project X 7.0 shafts)
    View source
  • P760 (4), TaylorMade RORS proto (5-9), with Project X 7.0 shafts
    View source
  • Irons: TaylorMade “Rors Proto” (3-9 iron; Project X 7.0 shafts)
    View source
  • Irons (5-9): TaylorMade RORS PROTO, with Project X 7.0 shafts
    View source
  • Irons: Taylormade Rors Proto Blades 3-9, with ProjectX 7.0
    View source
  • Titleist Vokey SM9 (54° 10-S, 58°K, Project X 6.5 shafts)
    View source
  • IRONS: Callaway Apex MB (4-PW), with Project X 6.5 shafts
    View source
  • Irons: Callaway Apex TCB (4-9 iron; Project X 6.5 shafts)
    View source
  • Irons : TaylorMade Rors Proto (3-9; Project X 7.0 shafts)
    View source
  • IRONS: TaylorMade P7TW (5-PW), with Project X 6.5 shafts
    View source
  • Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
    View source
  • Callaway Apex MB (4-PW) – Shafts: Project X 6.5 (4-PW)
    View source
  • TaylorMade P730 Rors Proto (3-9, Project X 7.0 shafts)
    View source
  • Irons: Callaway Apex TCB (4-PW; Project X 6.5 shafts )
    View source
  • TaylorMade RORS proto (5-9), with Project X 7.0 shafts
    View source
  • Irons: Titleist T100 (4-9, TProject X 125 6.5 shafts)
    View source
  • Irons: Callaway Apex TCB (4-PW; Project X 6.5 shafts)
    View source
  • Irons: Callaway Apex TCB (4-PW; Project X 6.5 shafts)
    View source
  • Irons: Ping Blueprint S (4-PW; Project X 6.5 shafts)
    View source
  • Irons: TaylorMade P750 (4-PW; Project X 6.5 shafts)
    View source
  • Irons: TaylorMade P7TF (3-PW; Project X 6.5 shafts)
    View source
  • Irons: Ping Blueprint S (4-9, Project X 6.0 shafts)
    View source
  • Irons: Ping iBlade (4-9) with Project X 6.0 shafts
    View source
  • TaylorMade Rors Proto (3-PW; Project X 7.0 shafts)
    View source
  • Irons: TaylorMade P7TW 5-PW Shafts: Project X 6.5
    View source
  • TaylorMade Rors Proto (3-9; Project X 7.0 shafts)
    View source
  • Irons: Ping iBlade (4-PW), Project X 6.0 shafts
    View source
  • Irons: Callaway X Tour (3-PW; Project X shafts)
    View source
  • Ping Blueprint. (8-9) ( Project X 6.5 shafts )
    View source
  • Tom KimPRESS
    Irons: Titleist ’23 T100 Shafts: Project X 6.0
    View source
  • Shortly after the video was released, Boston Common played and defeated Los Angeles Golf Club in their TGL opener, with McIlroy using TaylorMade P7CB irons from 4-iron to 9-iron, remaining with Project X 7.0 shafts.
    View source
  • The only change he’s made in the last seven years is a shaft swap from Project X 6.0 to True Temper Dynamic Gold X100 Tour Issue as he got stronger and began to execute shots with different trajectories.
    View source
  • The changes included returning to his old TaylorMade P760 (3-4)/P730 (5-PW) iron and Project X shaft setup and inserting a Spider X Hydro Blast putter with a SuperStroke Traxion PistolGT Tour grip.
    View source
  • He picked up more than nine shots on the field on approach shots while hitting 56 of 72 greens (77.8 percent) using his Ping iBlade irons with Project X 6.0 shafts and Golf Pride MCC grips.
    View source
  • Jon Rahm was of those players in the field who chose to remove his Callaway Epic Speed Sub Zero Triple Diamond T 5-wood and replace it with a 22-degree X Forged UT (Project X 6.5 shaft).
    View source
  • Rahm has also kept his P750 irons in the bag for 2019, opting to play them from his 4-iron to his pitching wedge and they are equipped with Project X 6.5 shafts.
    View source
  • Mickelson put them straight in the bag from 5-iron to pitching wedge and kept the Project X 7.0 shafts in his wedges and the original KBS Tour in his 4-iron.
    View source
  • McIlroy also will employ the company’s Milled Grind wedges, including a 46-degree that will serve as his pitching wedge with the Project X 6.5 shafts.
    View source
  • Previously, McIlroy had been a four-wedge player, using TaylorMade MG4 (46, 50, 54, 60 degrees) wedges fitted with Project X 6.5 shafts.
    View source
  • The stronger Project X 7.0 can be found in McIlroy’s irons, while the softer 6.5 is installed in the wedges.
    View source
  • he uses the same Project X 6.5 shafts in his 46- and 52-degree wedges that he does in his irons
    View source
  • Conners is equipped with three Ping s159 wedges , which also feature the Project X 6.0 shaft.
    View source
  • The irons have Project X 7.0 steel shafts while the wedges are Project X 6.5.
    View source
  • According to Ping, his irons are 1 degree upright with Project X 6.0 shafts.
    View source
  • All irons are fitted with Project X 7.0 shafts and Golf Pride MCC grips.
    View source
  • All his irons are fitted with Project X 6.5 shafts.
    View source
  • It also has a black Project X 6.5 shaft to match.
    View source
  • TaylorMade P7TW 5-PW Shafts: Project X 6.5
    View source
  • Shafts: Project X 6.5 Lofts: 22/26/30/34/38/42/47
    View source
  • Project X 6.5 (46°, 50°, 54°)
    View source
  • Shafts: Project X 6.5 (4-W)
    View source
  • Shafts: Project X 6.5
    View source

Players who use this also use

Browse all shafts